-
Conventional Manual Call Point AW-D135C
The AW-D135C Conventional manual call point is designed to be use with an intelligent two-wire control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the equipment status of the manual fire call points. When the manual fire call points is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit.
This passage will introduce the features, installation, wiring and use of AW-D135C conventional manual call point, to help you understand more about the conventional manual call point.
KSh999.00Conventional Manual Call Point AW-D135C
KSh999.00 -
Asenware Fire Alarm Smoke Detector
Asenware Fire Alarm Smoke Detector uses a state-of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with the most conventional fire alarm panel.
- Operating Voltage Range: 9 to 28 VDC Non-polarized
- Standby Current: ≤120uA@24VDC
- Maximum Alarm Current(LED on): ≤15mA@24VDC（1K Ohm current-limiting resistance）
- Operating Humidity Range: ≤95%RH(40℃±2℃)RelativeHumidity, Non-condensing
- Operating Temperature Range: -10℃ to 50℃(14ºF to 122ºF)
- Smoke Alarm Sensitivity: 0.1-0.15dB/m
- Height: 48.2mm installed in Base
KSh1,200.00Asenware Fire Alarm Smoke Detector
KSh1,200.00 -
Asenware Battery Powered Stand Alone Smoke Detector
Asenware Battery Powered Stand Alone Smoke Detector is a photo-detector that uses the most advanced optical sensing chamber. It is designed to provide open area protection without wiring, and it is easy to install and construct.
Asenware Battery Powered Smoke Detector specifications:-
Operating Voltage:- 9VDC(with battery)
Operating Current:- Monitoring Status <= 8uA, alarm status<= 20mA Temprature:- -10 Degree Celcius ~ 55 Degree celcius Relative humidity:- <= 95% non condensing Protection class: IP20 Application: Indoor use only Smoke Alarm Sensitivity:- 0.18 to 0.26 dBM Alarm level: >= 85dB@3m and >= 93dB@1m
Materials and colors:- ABS, whiteKSh1,400.00 -
Fire Alarm Sounder and Strobe Light
Fire Alarm Sounder and Strobe Light is powered by a 24v electrical circuit. In the event of a fire, the sounder will sound and flash at the same time. Very stable and reliable; easy to install and wire; can be used in different emergency situations.
- Adopt the two-wire or the four-wire system wiring method
- The mainline end receives two main lines, No polarization
- Connect the power end to a DC24V power line.
KSh1,700.00Fire Alarm Sounder and Strobe Light
KSh1,700.00 -
ZKteco K40 Time attendance terminal
- Display 2.8-inch TFT Screen
- Fingerprint Capacity 3,000
- Card Capacity 3,000 (optional SSR:1,000)
- Transaction Capacity 100,000
- Communication TCP/IP, USB-host
- Standard Functions: Workcode, SMS, DST, Self-Service Query, T9 input, Automatic status swithch, 14 Digit User ID, Backup Battery, Schedule Bell, Simple access control
- Optional Functions ID/IC Card, SSR, external bell
- Power Supply DC 12V/1.5A
- Operating Temperature 0°C to 45°C
- Operating Humidity 20% to 80%
- Dimensions (mm) 184*136*37.6 (L*W*T)
KSh9,000.00KSh10,499.00ZKteco K40 Time attendance terminal
KSh9,000.00KSh10,499.00 -
ZKTeco X7 – Fingerprint Access Control
ZKTeco X7, one of innovative biometric fingerprint reader for access control applications. Offering unparalleled performance using an advanced algorithm for reliability, precision and excellent matching speed. It can operate on standalone mode with the interface for third party electric lock, alarm, door sensor, exit button and doorbell. Keypad operation is easy and convenient, such as, enrolling user, deleting user and accessing control parameter settings etc.
KSh9,000.00ZKTeco X7 – Fingerprint Access Control
KSh9,000.00 -
ZKTeco F22 WI-FI time attendance and access control
F22 is an ultra-thin fingerprint time attendance and access control terminal with Wi-Fi, which offers unparalleled performance with advanced algorithm for reliability, precision and excellent matching speed. F22 features the fastest commercial-based fingerprint matching algorithm and ZKTeco high-performance, high-image quality infrared detection fingerprint sensor.
KSh13,500.00KSh16,000.00ZKTeco F22 WI-FI time attendance and access control
KSh13,500.00KSh16,000.00 -
ZKTeco F18 Biometric Fingerprint access control
The Zkteco zk F18 is an Innovative Reader used for both access control and time attendance applications. The device has three levels of security i.e Fingerprint Reader, RFID Reader, and PIN access. Zkteco F18 can be installed as a standalone device or with a third-party controller using the Wiegand protocol.
KSh14,500.00ZKTeco F18 Biometric Fingerprint access control
KSh14,500.00 -
Zkteco ZK MB360 Access Control Time Attendance Device with Face Recognition
Features
- Featured with ZK advanced fingerprint and face recognition technologies.
- It supports multiple verification methods including face, fingerprint, card, password, combinations between them and basic access control functions.
- User verification is performed in less than 1 seconds, which streamlines the process of access.
- The communication between the MB360 and PC is by TCP / IP or USB interface for manual data transfer.
- Its sleek design fits perfectly in any environment.
KSh17,499.00KSh17,999.00Zkteco ZK MB360 Access Control Time Attendance Device with Face Recognition
KSh17,499.00KSh17,999.00 -
ZKTeco TF1700 Weatherproof Standalone Fingerprint Card Reader
- Fingerprint Sensor Type (optional): Infrared detection fingerprint sensor
- Algorithm Version: ZK Finger V10.0
- Communication: TCP / IP, RS485*, USB Host
- Fingerprint Capacity (optional): 3,000 Fingerprints (8,000 Optional)
- Card Capacity: 10,000 Cards
- Log Capacity: 50,000 Transactions
- Logs Capacity: 50,000 Transactions
- RF Card: EM (standard) / IC Card (optional)
- Authentication Method: Finger / PIN / Card
KSh20,000.00 -
Zkteco Speedface-V3L
- Display:-2.4-inch touch Screen
- Card Capacity:-3,000
- User Capacity:-3,000
- Face Capacity:-SpeedFace-V3L : 500
- SpeedFace-V3L[QR] : 500
- Fingerprint Capacity:-3,000
- Logs Capacity:-200,000
- Facial Recognition Speed:-<1s
- Communication:-TCP/IP,WiFi(Optional),Wiegand Input/Output,RS485
- Operation System:-Linux
- Standard Functions:-ADMS, DST, Camera, 14-digit User ID, Access Levels,Groups, Holidays, Anti passback, Record Query, Tamper Switch Alarm, Multiple Anti-Passback
- Hardware:-1.2GHz Dual Core CPU, 256MB RAM/512MB Flash, 1MP Binocular Camera Adjustable LED Fill Light
- Access Control Interface:-3rd Party Electric Lock, Door Sensor, Exit Button, Alarm output, Auxiliary Input
- Power Supply:-12V 3A
- Ingress Protection Rating:-IP65
- Operating Temperature:–5°C to 45°C
- Operating Humidity:-10% to 90% RH
KSh21,999.00KSh22,200.00Zkteco Speedface-V3L
KSh21,999.00KSh22,200.00 -
8 Zone Asenware Fire Alarm Control Panel
8 Zone Asenware Fire alarm control panel Specification:-
It is modularized design, the panel can expend from 1 zone to 32 zones easily.
It has 2 level control mode by a lock
It has 24VDC and 5VDC power supply output.
It has FIRE and FAULT signal output.
It has 2 general sounders output.
Each zone has 1 circuit detectors input .
Each zone can be disable by a button.
It has RESET button to reset the panel.
It has SILENCE button to stop BUZZER and SOUNDERS.
It has EVACUATE button to start a manual fire alarm immediately.
It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
It has an optional GSM module for fire alarm by SMS .KSh22,000.00KSh25,000.008 Zone Asenware Fire Alarm Control Panel
KSh22,000.00KSh25,000.00
