• 2 Core Fire Alarm Cable 1.5mm 100m

    2 Core Fire Alarm Cable 1.5mm is designed to resist the spread of fire into a new area. Fire-resistant or fire-rated cables are designed to maintain circuit integrity and continue to work for a specified period of time under defined conditions.

    We supply and install fire-rated alarm cable, which conforms to (UL) 758 and ISO 9001 Standard.
    Two core, 100m per roll.

  • 2 Door Interlocking Module for access control

    Access Control 2 Door Interlocking Module is a high security device that control 2 doors in and airlock situation. When used with our Door status range of magnetic locks 2 door interlocking is achieved allowing only 1 door to be open at a time. It can easily be integrated with fingerprint access devices or a simple press to exit button.

  • 450mm double galvanized razor wire 10 meters

    450mm double galvanized razor wire is a highly effective security fencing material consisting of sharp-edged steel tape punched into a high-tension galvanized core wire, forming a large-diameter coil that expands like a spring for perimeter security. The double galvanization provides enhanced rust resistance for durability, while the sharp, thick blades create a formidable physical barrier to deter unauthorized access. This type of razor wire is often used for residential and commercial security and can be installed alone or as an additional layer of protection with an electric fence

    KSh1,450.00KSh2,000.00
  • 6 Core Security Alarm Cable

    • Resistance: 110R/km
    • PVC wall thickness: 0.50mm
    • Copper conductors
    • Complies to BS4737-3.30:2015, Type 3
  • 8 Zone Asenware Fire Alarm Control Panel

    8 Zone Asenware Fire alarm control panel Specification:-

    It is modularized design, the panel can expend from 1 zone to 32 zones easily.
    It has 2 level control mode by a lock
    It has 24VDC and 5VDC power supply output.
    It has FIRE and FAULT signal output.
    It has 2 general sounders output.
    Each zone has 1 circuit detectors input .
    Each zone can be disable by a button.
    It has RESET button to reset the panel.
    It has SILENCE button to stop BUZZER and SOUNDERS.
    It has EVACUATE button to start a manual fire alarm immediately.
    It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.
    It has an optional GSM module for fire alarm by SMS .

    KSh22,000.00KSh25,000.00
  • Access Control Door Lock Power Supply 12V 5A

    • HIGH EFFICIENCY: High utilization efficiency, the output power can meet a door, two electric locks or two magnetic locks 280KG force work at the same time, small size, simple installation, easy to use
    • STABLE PERFORMANCE: The power supply box adopts a double relay design, excellent electronic components to ensure stable power supply, can control various types of electric locks, electric strike locks, electric latch locks, magnetic locks
    • STRUCTURAL RUGGEDNESS: Shell made of metal, high-temperature surface baking paint treatment, more beautiful and, not easy to damage, compact design, light weight, short-circuit and overload protection
    • APPLICABLE SCENARIOS: Applicable to building intercom, access control, professional design, exquisite workmanship, can control various types of electric locks, based on the time-delay control circuit to meet your demand
    • EXQUISITE WORKMANSHIP: Access control power supply using exquisite manufacturing process, to provide you with excellent results.
      Adjustable delay timer 0-15 Seconds
    • Two Push Switch Inputs supporting both entry and exit
    • Normally Open NO and Normally Closed NC outputs for different lock options
    • Battery charging option (Battery not included)
  • Access Control Magnetic Lock 280kg

    Access Control Magnetic Lock 280kg, offer cost-effective solution with easy installation & suitable for a variety of application. It has no moving parts thus keeping maintenance to a minimum. All types of brackets are available to ease installation for both in–swing & out–swing doors.

    Maglocks are the most popular way of securing a door for Access Control due to the competitive price, ease of installation, variations and reliability

    Our Magnetic Lock range includes 300lbs, 600lbs 800lbs and 1200lbs maglocks for internal and External use.

  • Access Control Magnetic Lock 350kg

    Access Control Magnetic Lock 350kg, offer cost-effective solution with easy installation & suitable for a variety of application. It has no moving parts thus keeping maintenance to a minimum. All types of brackets are available to ease installation for both in–swing & out–swing doors.

    Maglocks are the most popular way of securing a door for Access Control due to the competitive price, ease of installation, variations and reliability

  • Access Control Power Supply Unit 12V 3A

    – High Efficiency and good price
    – Built-in EMI filter
    – 100% full load burn-in test
    – Low output ripple and noise
    – Protection:Over load/Over voltage/Short circuit
    – With protective circuit
    – Output: 12V, 3A 12VDC
    – Capable to connect with 12V 7AH backup battery

  • Asenware Battery Powered Stand Alone Smoke Detector

    Asenware Battery Powered Stand Alone Smoke Detector is a photo-detector that uses the most advanced optical sensing chamber. It is designed to provide open area protection without wiring, and it is easy to install and construct.

    Asenware Battery Powered Smoke Detector specifications:-
    Operating Voltage:- 9VDC(with battery)
    Operating Current:- Monitoring Status <= 8uA, alarm status<= 20mA Temprature:- -10 Degree Celcius ~ 55 Degree celcius Relative humidity:- <= 95% non condensing Protection class: IP20 Application: Indoor use only Smoke Alarm Sensitivity:- 0.18 to 0.26 dBM Alarm level: >= 85dB@3m and >= 93dB@1m
    Materials and colors:- ABS, white

  • Asenware Fire Alarm Smoke Detector

    Asenware Fire Alarm Smoke Detector uses a state-of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with the most conventional fire alarm panel.

    • Operating Voltage Range: 9 to 28 VDC Non-polarized
    • Standby Current: ≤120uA@24VDC
    • Maximum Alarm Current(LED on): ≤15mA@24VDC(1K Ohm current-limiting resistance)
    • Operating Humidity Range: ≤95%RH(40℃±2℃)RelativeHumidity, Non-condensing
    • Operating Temperature Range: -10℃ to 50℃(14ºF to 122ºF)
    • Smoke Alarm Sensitivity: 0.1-0.15dB/m
    • Height: 48.2mm installed in Base
  • Conventional Manual Call Point AW-D135C

    The AW-D135C Conventional manual call point is designed to be use with an intelligent two-wire control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the equipment status of the manual fire call points. When the manual fire call points is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit.

    This passage will introduce the features, installation, wiring and use of AW-D135C conventional manual call point, to help you understand more about the conventional manual call point.

Main Menu